Wilson Nozzles: Foam Nozzles

WILSON FIRE PRODUCTS

FOAM NOZZLES

EXPANSION FOAM NOZZLES

The Expansion Foam Nozzles consist of a body and a deflector especially designed for an optimized foam distribution. The foam solution stream is fractioned and air is sucked in inside the brass body, and then distributed by the deflector with covering angles up to 90°. Foam expansion rate typically 1:20 or 1:50. Body Material : Brass or 316 stainless steel

Download Cat : Expansion foam nozzles.pdf

FOAM Nozzles

Low flow

Stainless steel Material
1/2 inch Male NPT or BSP
Working pressure 2.1 bar to 4.2 bar
Flow : 61 liter/min @ 2.1 bar
Maximum working : 12 bar
K factor : 42
Coverage : 9.3sq.m.(100 sq ft)
Minimum foam solution application rate as per NFPA of 6.5 LPM/sq.m.

Download Cat : low Flow Foam Nozzle

IN-LINE FOAM INDUCTOR

Download Catalogue : Inline Inductor.pdf

Aluminium, Bronze or Stainless steel construction

50, 65, 80, 100 & 150 mm (2", 2.5", 3", 4" & 6") size with fix flow of 75 to 3500 lpm

Working pressure 6.4 to 12 bar (93 to 175 psi)

Maximum back pressure as 65%

Each unit is calibrated and factory tested for flow, induction rate at maximum back pressure.