  
 
 
|
     
|
|
|
|
|
-
Flow range 153 Lpm @0.5 Bar to 968 Lpm @ 20 Bar (41 to 256
Gpm)
-
3 Circumference Spray with 170 degrees Full Cone
-
Atomise Droplets range 650 microns to 2000 microns
-
One piece construction, Non clog
-
1" NPT (M) connection
-
Copper Nickel C95600 for Sea Water Application.
-
Corrosion resistant.
DOWNLOAD CATALOGUE -
T_Series.pdf
|
|
|
|
WINDOW
CLEANING NOZZLES
-145 degrees FAN |
|
|
Large Angle Deflection Principle – Type
FW
FW flat jet nozzles work on the deflection principle
conveying a stream of water onto a machined deflecting surface,
producing a wide angle flat spray pattern having low impact
value and small droplets. Their round orifice minimises the risk
of clogging.
Typical Applications:- Producing Fire Curtain, Ship side cooling,
bulk head cooling, Oil Rig Hull Cooling and
washing of vertical surfaces, washing fruits, stones or any such
material on a moving conveyor.
Connection: 1/8" to 1" BSP or NPT
Spray angles: 90° to 140°
Material: PVC, Polyproperlyne, 303 Stainless Steel, 316 Stainless Steel, Brass
DOWNLOAD CATALOGUE -
FW_Series.pdf
|
| WATER MIST FIRE
SUPPRESSION |
|
|
WaterMist system uses
fine fog in fire suppression to deprive oxygen, for
class A and class B. Water is subject to 70 bar pressure
through the Ruby Insert Fog Nozzles produces droplets of
about 20 to 30 microns which has critical mass of heat
exchange surface area allowing rapid evaporation
fire.
The slow decent of the
fog mist in the engine room facilitates suppression of
oxygen in a fire without damage to the electrical
controls.
Download Catalogue -WaterMist
Fog Fire Protection.pdf
|
| 360 Degrees WATER SCREEN
NOZZLE |
|
|
WILTEX 360 FLAT
with a K factor of 35 has an
external deflector which discharges water in a 360
degrees flat circular shaped pattern of small droplet
size. The water is uniformly distributed over the
surface to be protected. WILTEX 360 FLAT is used in water
screening application to create a water droplet wall to
prevent dust inflow , mitigation of fumes or inbound
toxic gas.
|
Model : WILTEX
360 FLAT
Size : 1/2" or 3/4 inch Male NPT
Spray angle : 360
degrees Fan
Material : brass or
stainless seel
Deflection diameter : 4
metres.
|
 |
Download Catalogue -
Wiltex 360 Flat.pdf
|
|
|
FIRE
DELUGE NOZZLE MEDIUM VELOCITY
ANGUS THERMOSPRAY |
|
THERMOSPRAY - A product of ANGUS
|
The Angus Thermospray is designed primarily for use in engineered
fire protection systems to provide exposure protection or to combat
fuel fires with a flashpoint below 66ēC. Where fast flame knock down
and security against burn back are important Angus Foam-Water
nozzles should be considered..
|
|
| FIRE
PROTECTION |
"N" Series Fire Deluge Nozzles |
|
Lloyd's, FM and UL approved for marine, hazardous
environment
90, 120 deg Full Cone
A
product of BETE USA
|
|
|
|
FIRE PROTECTION |
UL (Underwriter
Laboratory) |
|
A product of HD |
HD SERIES
-
Material - Brass with Bright Nickel Chrome, Al Bronze
-
Approvals - UL Listed
-
Open orifice design used in fire deluge
system in offshore platforms, rigs, ships.
-
Size 1/2" BSPT or NPT (Male)
-
Full cone spray pattern
-
K-factor: metric22, 30, 35, 41, 51,
64, 79, 91 & 102
-
K-factor: US -1.54, 2.10, 2.45, 2.87,
3.57, 4.48, 5.53, 6.37 & 7.14
-
Spray angle - 65°,80°,90°,100°,110°,120°
& 140°
-
Each Nozzle body permanently marked with
model number, batch number, spray angle,
K-factor & UL
-
Download Catalogue :
MVA_MVAS.pdf
|
|
|
|
