Type F
Flat Fan Nozzlesare the most widely used flat fan nozzle because of their
large range of capacities, spray angles, connection
sizes and materials.
Size :: 1/8"
to 3" BSP / NPT, Spray
angles: 0° to 120°
Material: 303 Stainless
Steel, 316 Stainless Steel, Brass , Capacities range from 0.06
l/min to 230 l/min @ 3 bar.
Large Angle Deflection
Principle – Type FWFW
flat jet nozzles work on the deflection
principle conveying a stream of water
onto a machined deflecting surface,
producing a wide angle flat spray
pattern having low impact value and
small droplets. Their round orifice
minimises the risk of clogging.
Typical Applications:- Producing Fire
Curtain, Ship side cooling, bulk head
cooling, Oil Rig Hull Cooling and
washing of vertical surfaces, washing
fruits, stones or any such material on a
moving conveyor.
Connection: 1/8" to 1" BSP or NPT
Spray angles: 90° to 140° Material:
PVC, Polyproperlyne, 303 Stainless
Steel, 316 Stainless Steel, BrassDOWNLOAD CATALOGUE -
FW_Series.pdf
Four (4) piece
construction
consisting of Body, internal steel
mesh strainer, Fan tip and Cap.
Inter-changeable spray tip of
various angle from 0 to 150 degrees.
Size : 1/4 or 3/8
inch
(Male) BSP or NPT Cone shaped :
0 to 150 degrees FAN spray angle
Droplets : Atomization.
Material : 316
stainless steel or Brass
360 Degrees WATER SCREEN
NOZZLE
WILTEX 360 FLAT
with a K factor of 35 has an
external deflector which discharges water in a 360
degrees flat circular shaped pattern of small droplet
size. The water is uniformly distributed over the
surface to be protected. WILTEX 360 FLAT is used in water
screening application to create a water droplet wall to
prevent dust inflow , mitigation of fumes or inbound
toxic gas.
Model : WILTEX
360 FLATSize : 1/2" or 3/4 inch Male NPT Spray angle : 360
degrees FanMaterial : brass or
stainless seelDeflection diameter : 4
metres.
